PRP's Seat Mount and Slider Kit for the Can-Am Maverick X3 and Maverick R allow you to install your favorite PRP Seats into your UTV. Rather than just a simple adapter mount this is an entire new rail system with more height adjustments, and includes our dual locking seat sliders.

A common complaint on the X3 is that the seat sliders start to get stuck after dirt and dust gets into the wheels. So we've added in our own slider kit that has been tried, tested, and proven over the last 20 years in all sorts of off-road environments. Our dual locking sliders provide more security and stability.

Both the right and left sides of the sliders have locking mechanisms to keep them in place during hard impacts. These seat mounts allow for an enhanced range of adjustability, allowing the seats to get as low as they can possibly go. You have the ability to set the height and depth of the mounts to get the perfect position for each rider. Creating better comfort, and confidence behind the wheel.

The flat base mounts are lower than the stock rails, and have an offset mounting point in the front. So you can flip the mounts down if you want to be lowered an inch, or flip them up if you want to raise the seat height an inch.

The mounts use the existing mounting points in the cab, which allow you to raise or lower the seat in the front and back to adjust the seating angle. At the lowest settings with the mounts flipped down, you can sit about 3 inch lower. This mount is perfect for those with lowered cages.

For Maverick R owners this the only mount that we recommend using in the front. The passenger side of the Maverick R has a glove compartment that sticks out farther, making it harder for taller passengers to fit comfortably. This seat mount and slider kit allows you to adjust seat farther back, and adjust the recline angle to get more legroom on the passenger side.

However the Rear of a Maverick R MAX you must use our standard C86 Can-Am adapter mount, as the rear sliders are a differnt design.

This kit comes with 2x XCR Seats, and the C91 Can-Am Mount and Slider Kit (Pair)

This kit comes with 2x GT3. Seats, and the adapter mounts to fit into the front or rear of your Can-Am X3 and X3 MAX. The adapter mounts attach to your OEM seat base and sliders. This allows you to install the seat while retaining the ability to slide back and forth.

XCR Suspension Seats Mount and Slider Kit for Can-Am Maverick X3 and Maverick R (Pair) Black

Fitment

• Can-Am X3
• Can-Am X3 MAX (Front and Rear)

Features

• Add more comfort and containment to your UTV and SXS with PRP's XCR Suspension Seats
• This kit comes with 2x GT3. Seats and lowered seat slider and mounts for the front seats of your Can: Am X3, X3 MAX, Maverick R, and Maverick R MAX
• The XCR is PRP'S latest UTV seat with dual slot headrests and modern styling
• Low sided containment makes it easy to get in and out
• Open side bolsters that work with OEM seatbelts, retractable harnesses, and allow for easy lap belt adjustment
• A great seat for trail riding, or when you're constantly getting in and out on rides
• Removable seat cushion with 5th point slot: Easier to clean, and allows mud/water/sand to drain through.
• The seats suspension liner and steel frame construction decreases the impact on the body, reducing the fatigue you feel after a long day in the dirt or dunes
• Kit comes with replacement Sliders and Seat Mounts than can sit lower than the stock sliders.
• Fits on the Front or Rear of the Can: Am X3 MAX, and the Front Only of a Can